- Texas Instruments F2808 DSP eCAN Guide
An in-depth look at the code required to setup and use the eCAN peripheral of the Texas Instruments F2808 DSP for basic transmitting and receiving of messages.
- Bluetooth Motor Control via Distance
For what appears to be technical reasons, the NXT Direct Commands portion of the LabVIEW NXT Toolkit lacks a way to control how many times a motor rotates. This tutorial demonstrates a method for gaining such control using a custom subVI and a management program that runs on the NXT Device.
- NXT Direct Command GUI Application
This is essentially instructions for how to recreate the application I used to control the 3 DOF robotic arm seen in a couple of the videos in the Media Archive section. Note: This tutorial references the Bluetooth motor control method detailed in the tutorial above, so read that one first.
- LabVIEW NXT Toolkit Overview
While not a tutorial per say, this evaluation of LabVIEW's NXT Toolkit provides insight into what to expect when using it.
- Microsoft Robotics Studio Supplemental Overview
An explanation of some of the key concepts found in the Microsoft Robotics Studio, meant primarily to aide those going through the tutorials found on the Microsoft Robotics Studio Developer Center website.
